4 Channel Home Audio Amplifier 11 watt using IC TDA1554

This is a simple circuit. Just use a single IC, but the amplifier has 4 channels, 11 channels per watt, which is Philip IC TDA1554 number suitable for listening at home or in any vehicle. Just because the power supply 12-15 volt or will be used to expand any home theater sound system. The first 2-channel amplifier front speakers. And 2 to extend the back surround sound speakers also.
This circuit power supply 12 volts to 18 volts Power consumption at 5A. The input 4 input pins 1, 2, 17 and 18 is divided into a horizontal input inverter Ting 2 channels (Pin 1, 17). inverse model and input object 2 channels (pins 2, 6). That we can use that. To output phase to phase or did not return. The output will be the fourth slot on the leg 6, 8, 12, 10, with a C7-C10 serves to increase the low frequency stability better before you go to the speaker. The switch S1 acts on mute by pressing S1 will be closed sound system circuit in Mute, and if open circuit S1 standby ready to work. The C5 and C6 will filter light to smooth out and eliminate interference.

Related Links
4 Channel Home Audio Amplifier
4 Channel Car Amplifier
Car audio amplifier
4x34W car audio amplifier based on TDA7384
TDA2004 Amplifier Car audio stereo OTL 10W+10W (with PCB)
TDA1908 Amplifier CAR AUDIO OTL 8W

Related Posts :

  • This circuit is a circuit-watt amplifier size at a reasonable 22W 22W. This is the mod is perfect for listening at home or in any vehicle. Is a simple circuit. Use small pieces of equipment an ...

  • A circuit surround sound simple.Circuit is created newness of the sound to a wider sound dimension.That the device R and C, to share the audio delay. To get a new sound dimension. When the s ...

  • IC number is BA5406 IC stereo audio amplifier size 3 watt + 3 watt.The circuit is small and easy to create.Suitable for expanding the use of music in a private room.Or may be used in any trial ...

  • IC amplifier 18 watt circuit is an IC number HA13118 Hitachi Hard. That the IC will be integrated amplifiers, class AB. And this cycle is to use a bridge circuit. As a result, growth rates up ...

  • The IC 10W +10 W stereo amplifier circuit design that looks similar to the IC 8W +8 W stereo amplifier circuits of the previous album.But it will change the IC amplifier as a number TDA2009.Wi ...