Many Electronic circuit projects in simple ways of learning

SCR Mini Power Inverter

This be Mini Power Inverter , by use SCR be main part electronics , perform Oscillator Generator 400Hz give Output 300V by use Voltage Input 12V Current 0.8A.

The only drawback with this circuit is that it might latch in the conducting state if the load is too heavy or if there is a short at the output, this requires some kind of protection, on the input line, in the form of a fuse or similar. The transformer used is a 10W mains type with 6V+6V windings on the SCR side and a 110V+110V windings, in series, at the output. Efficiency is 50% and the ideal load is equivalent to a 22k resistor, 5W. The output waveform is vaguely sinusoidal at a frequency of 400Hz.


SCR Mini Power Inverter

In addition to this circuit. You can see the other circuits. Having similar properties such as:
Micro Inverter by 2N6121 This is Micro inverter or The inverter very small-sized, perform modify from the energy battery the small-sized , have the value voltage about 220V AC Volt 50HZ. By the circuit composes 2 transistors performs pulse oscillator generator […]
Mini inverter 10W-30W by Transistor D313 This is AC circuit mini inverter 10W – 30W. It Converts 12VDC to 220VAC Output 10W to 30W . Use easy Circuit Square Wave Oscillator Generator 50Hz.
Inverter 100W 12V to 220V by Transistor When use the electric appliances that want 220V AC 50HZ, which have small-sized about 100Watt not exceed. By when you apply outside home, as a result have to have Mini power inverter about 100Watt,[…]

Related Posts


JLCPCB - Only $2 for PCB Protytpe(Any Color)

With 600,000+ Customers Worldwide, 10,000+ PCB Orders Per Day

Up to $20 shipping discount on first order now: https://jlcpcb.com/quote

This Post Has 11 Comments

  1. is it two primary; one secondary transformer?

  2. Please explain its working too.

  3. WHAT IS EQULENT TRANSISTOR FOR TIP41 & TIP42

  4. i have a 9v to 230v transformer (1 primary and 1 secondary) inputs does it works for this transformer

  5. will you please tell me, circuit of single phase of pulse width modulation inverter.

  6. can any one tell how inverter control through pwm technique using 4 scr. i will be vry much thankful of u.

  7. will you please tell me, circuit of single phase of pulse width modulation inverter.

  8. I have a need for an inverter that will take me from 12VDC to something around 28V/400hz. I want to have enough power to run about 6 sensor and 6 indicator coils.

  9. I have a need for an inverter that will take me from 12VDC to something around 28V/400hz. I want to have enough power to run about 6 sensor and 6 indicator coils. ..

  10. I urge you to please check out my Facebook page, under Don Parkinson. Look specifically for “Copper, Quartz and Magnets”, you will not be disappointed. New concept. I love your designs. I wanted to inform you of this.

    Have a most honorable day!

  11. Iam automobile technician can be a technician by qualification

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Close Menu