BA5406 amplifier Stereo 3W
This is a small Stereo amplifier 3W + 3W using BA5406-IC. It use 12V power supply as source of this project. and use a few part so easy to build.
3 Comments
August 22, 2019
LM386 stereo amplifier in bridge 2 watts
This is 2 watts + 2 watts Stereo small LM386 amplifier x3 ICs. It is cheap and easy to builds for BCL amplifier,mobile,MP3 player using 6V battery (AA x 4) [...]
August 15, 2019
TDA2009 amplifier stereo 10W
The IC-TDA2009 amplifier circuit on stereo 10W+10W IC is to qualify from the power supply 8-24V, the current maximum of 1-2A. and 24V load 4 ohms [...]
May 31, 2019
TDA2030 transistor amp circuit with PCB
Relatively easy to build up to 30W Amp OTL by TDA2030 transistor is packed into this project.the power dissipation of 20W at 8 ohm or 30W at load 4 ohm
May 18, 2019
4 transistor audio amplifier circuit
This is a 4 transistor audio amplifier circuit. Which is a 4-transistors complementary push-pull amplifier, that shows the basics of audio amplifier design.
April 18, 2018
LM386 audio amplifier circuit with PCB
This is an LM386 audio amplifier that can be used with a small 9 volt Battery Operated,Current use as little as 5 milliamps.And amplification up to 500 mW.
October 9, 2017
TDA2822 stereo amplifier circuit with pcb & datasheet
This is TDA2822 small stereo power amplifier. People like TDA2822. Me too. Why? Dual Amplifiers in one. With DIP-8 similar for LM368(Mono). Easy uses. Give power watts at 1W + 1W at 4 ohms speakers. It is enough. We are happy Listening in our corner. Relax... Start voltage supply of 1.8V to 15V. The wide a lot. Save energy with only 6mA, Min. The bandwidth expansion rates at 40dB 120kHz. Cheap and easy
May 7, 2017