Solar battery charger with overcharge protection

This circuit is formed maintain one’s position voltage from solar cell with , shunt regulator circuit. For protect voltage not too until much destroy battery. Because of something charger too much.

Solar battery charger with overcharge protection

The D2 be for protect current flow turn back from battery during nighttime. The circuit maintains one’s position current the few , for feed give the circuit randoms voltage battery.

Which have IC LM723 be main part by may use battery model acid general lead. That want power supply give the circuit all the time , thus should choose battery at have many capacity such as , 40Ah sizes etc. The detail is other , see in the circuit.

Note:

This circuit is not design PCB. If you do not want to design own PCB. Or use universal PCB Board that difficult.
I would recommend a 7 Amp solar Charge Controller

35 thoughts on “Solar battery charger with overcharge protection”

  1. I impresed by looking that ckt of solar charger using lm 723
    i want to do it in actual so can u tel on which pin of ic should i connect the resistance, diode …?

    Reply
  2. Sir, I am really impressed by the building-up of your solar charger circuit diagram,

    Sir the only problem that I am facing now is to identify the pins-number,

    Please can you help me,

    Thanks and best regards

    Reply
  3. Sir, I am really impressed by the building-up of your solar charger circuit diagram,

    Sir the only problem that I am facing now is to identify the pins-number of the IC Lm723 and how it is connected in the circuit,

    Please can you help me,

    Thanks and best regards

    Reply
  4. Sir, l have 240watt solar PV but no information solar battery charger & inverter so I buy lower cost sir give me directions

    Reply
  5. Hello my friend,

    Do you have any PCB or PCBA project recently?

    We are a professional manufacturer in China with specialization in PCB+PCBA turnkey services, from prototype to mass production.
    Our advantage concentrate on components with fast quoting, competitive price, authenic brand and no MOQ rule(it may resolve your inventory troubles).

    Offering: various pcb & fpc, pcb assembly service with smt&dip, components, stencil, plastic shell, mold,cables…

    If you have any need for these, I will be very glad to help you. 🙂

    Hope hearing from you! Thanks!

    Reply
  6. I want to set up the same circuit. I think you have done a great job. Can you write lm 723 integrated pin connectors? We need to know where you’re going, which ends when the connection?

    Reply
    • Hello Kadreus,

      Thanks for your visit. I am happy that you feel interested in this circuit.

      But I am so sorry. I cannot draw a pin number of 723 IC. It comes from an old book.

      I think in the future I can update it.

      Hope you can wait for me and continuously visit my site.

      Sincerely
      Apichet

      Reply
  7. I need a circuit to charge a lithium phosphate 12 volt DC battery. It needs to charge with a 5 amp constant current and an adjustable over voltage shutoff.

    Reply

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.