Many Electronic circuit projects in simple ways of learning

Quartz watch crystal oscillator circuit

My Friend need to like a Pulse Generator Oscillator circuit that stable frequency at 32.768KHz with watch crystal,for digital CMOS binary counter, so he tell to me even low prices.

I think may be used the watch crystal and IC4069 or IC4049 inverter CMOS IC. They are very cheap and we can look at the general electronic shop.

In the circuit figure first be produces to square wave form the other part I think you can know them, it very simple. If you take up the voltage power supply to 12V doing the output volt peak up to 12V as well.



But this circuit do not well for high frequency,you should use this a better: Crystal oscillator using TTL

My son get a watch crystal from the Cheap Quartz Alarm Clocks.
001_Cheap Quartz Alarm Clock

They are not yet durable. But we can take a well used components to reuse new our projects.
002_well used components to reuse

Inside Cheap Quartz Alarm Clock, there are component on PCB.
Inside Cheap Quartz Alarm Clock



Here is the watch crystal at 32.768KHz
Here is the watch crystal at 32.768KHz

He examined test waveform with oscilloscope. It is a square wave signal.
test waveform with oscilloscope

Then measure the frequency output by a frequency counter Kits. It is cheapest tool.
The frequency is 32771Hz or 32.771KHz. Meter accuracy Low. And we can adjust the frequency output by C1-56pF trimmer.
006_Then measure the frequency output is 32771HZ

CD4060 crystal oscillator circuit

This is 1Hz oscillator circuit for a standard digital clock,frequency size 1 Hz or 2 Hz. It can be used in the normal clock circuit. It consists of IC-4060 and IC-4013, the IC-4060 single acting Oscillator and Counter. of the frequency determined by the resistor and external capacitor.In the circuit, IC 4060 is a standard frequency generator with quartz crystal. The adjustment period with C2, and counter circuits within the IC 4060 will be only 2 Hz frequency dividing out the pin 3. The IC-4015 in the style of TF / F to divide two of the Clock signal frequency is out 1 Hz.

1hz-oscillator-circuit

Next circuit when you want to build a ramping waveform by crystal so also easily we used a singlr transistor 2N3904 or BC548 that is NPN types. the full voltage same power supply level. and you change to other wave form do not difficult or you can see Oscillator astable multi-vibrator with Crystal controller

This Post Has 4 Comments

  1. hi there, i did the circuit for the crystal oscillator using transistor and i didnt get the output, please can you explain me the reason for not getting the output.

  2. Hi Samir,
    Thanks for your good Answer. The output of the transistor circuit is a ramping waveform and there are frequency as crystal. I am sorry I cannot tell you the point error.

  3. Can anyone tell me how to use 25TTs_ _ phase control rectifier

  4. Hello,
    I am seeking a circuit using 2 4017 IC’s for a 16 LED running lights. Other IC’s maybe required. Please help me. I don’t know how to do this circuit.
    Thank you!
    Sarah Michelle

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Close Menu