Many Electronic circuit projects in simple ways of learning

FM transmitter circuit without coil

This is FM transmitter circuit without Coil, using inverter digital IC as main and controlled frequency is precise by a crystal.

FM transmitter circuit without coil

Figure 1 the circuit diagram

In Figure 1 is RF oscillator circuit which use an inverter IC1/2 and ceramic crystal filter 10.7 MHz to use drive IC1/4 – IC1/6 by through IC1/3.

When inverter in parallel form this impedance output is low. Thus, they can drive directly an antenna.

And the output of IC1/4 – IC1/6 is a square wave. Which has much more internal harmonic. The harmonic number 9 of frequency 10.7 MHz (96.3 MHz) will take place at the center of the FM band.

The IC1/1 is an audio amplifier which signals from the microphone will be amplified and will send to a varicap diode. This signal causes the capacitance of the varicap diode changed and make also oscillator frequency changes. Thus, its occurs modulation frequency.

Part you will need

Resistors ¼ W +-5%
R1: 6.8K
R2: 10K
R3: 1K
R4: 1M
R5: 100K
R6: 1.5M
C1, C3: 0.1uF 50V Polyester capacitors
C2: 10uF 25V Electrolytic capacitors
C4: 100pF 50V Polyester capacitors
C5: 100uF 16V Electrolytic capacitors
C6: 22pF 50V polyester capacitors
C7: 0.001 uF 50V polyester capacitors
IC1: CD4069
D1: Varicap diode
Condenser Micro phone
Ceramic crystal filter 10.7 MHz

Note: You can buy ceramic filter here!

Related Posts

JLCPCB - Only $2 for PCB Protytpe(Any Color)

With 600,000+ Customers Worldwide, 10,000+ PCB Orders Per Day

Up to $20 shipping discount on first order now:

This Post Has 2 Comments

  1. Thanks, specially because I can’t make coil. If you can make a coil then please inform me.
    Thanks again.

  2. I needs some information about a simple project of hecopter.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Close Menu