V7 VHF FM Transmitter by 2N3866

The circuit is identical to the V7 VHF FM Transmitter but with a few small additions. TR1 (BC547) is an inverted Hartley oscillator which based upon an inductor fabricated on the PCB. This makes it megga-stable, and setable anywhere in the VHF FM band (76MHz to 119MHz) and the BB105 varicap makes it voltage tuneable over about 8MHz of that band. The inductor has one tapping for feedback and a second to feed an optional prescaler. TR2 is a buffer/amplifier and TR3 it the PA stage.

Read More Source:http://www.next.gr/rf/fm-transmitters/index3.html
Thank you.

FM TRANSMITTER By 2N2222
There is a lot more to designing an FM transmitter, than meets the eye. Here is a typical FM transmitter circuit. It consists of 3 stages. An audio amplifier, RF Oscillator and RF output. Read More Source :http://www.talkingelectronics.com/te_interactive_index.html Thank you. Relat ...
1.5W 1-2 km Range FM Transmitter by 2N2219
This is a well designed basic FM transmitter that you can easily recive the signals transmitted from this transmitter in a 1-2km range with using a normal FM reciever. Another property of this circuit is that the bobin is placed on the printed circuit board. The input sound's amplitude can b ...
FM surveillance BuG Transmitter using 2N2222
The Circuit shown can transmit voice to exceptionally good range. Tune trimmer to hear the signal to your near radio. Frequency range is 88-108 MHz. Max current consumption is 30mA. You can power the bug with a 9Volt Battery, or you can plug a power supply to feed in 9-12 Volts. That bug will pi ...
Simple FM transmitter with a single transistor by 2N2222
Mini FM transmitters take place as one of the standard circuit types in an amateur electronics fan's beginning steps. When done right, they provide very clear wireless sound transmission through an ordinary FM radio over a remarkable distance. I've seen lots of designs through the years, some of ...
2-TRANSISTOR FM TRANSMITTER by 2N3904,2N2222
While there are a plethora of similar 2-transistor schematics available, this one is above average. A major improvement over the little 1-transistor circuit that we've discussed previously, this transmitter consist of two stages. The first transistor is used to amplify audio, which means ...