Ultra-simple Voltage Probe

Detects 1.8 to 230 Volts DC or AC. This circuit is not a novelty, but it proved so useful, simple and cheap that it is worth building. When the positive (Red) probe is connected to a DC positive voltage and the Black probe to the negative, the Red LED will illuminate. Reversing polarities the Green LED will illuminate. Connecting the probes to an AC source both LEDs will go on. The bulb limits the LEDs current to 40mA @ 220V AC and its filament starts illuminating from about 30V, shining more brightly as voltage increases. Therefore, due to the bulb filament behavior, any voltage in the 1.8 to 230V range can be detected without changing component values.

Please read more at the original source: http://www.redcircuits.com/Page25.htm
Thank you.

Logic Probe by 74LS47
This circuit is a Logic Probe. It indicates the logic state of the node of any TTL logic circuit. To do that, we have to supply the probe with the same power of the circuit that we want to analyse: same Vcc and same GND. To check the logic level, we must connect the "Test" wire of the probe ...
Logic Digital Tester by LM324
This is Logic Digital Tester Circuit. It uses the level input about 5V and use the integrated circuit LM324. Be Main Part electronics perform Drive All LED. Then use Current very low about 10mA by have potentiometer be formed fine the value threshold give just right with the level ...
Mini Logic probe with transistor circuit
This is a Logic probe circuit is one,That is suitable for checking the voltage levels in the TTL circuit. It receives from the circuit being tested.Shows how high or low logic level one. The circuit when the input voltage to the probe Tip is higher than 2.1 volts (state logic "high").Transi ...
LED status TTL logic high low circuit
This is a cycle high or low status of the digital logic signal. Since the 5V power supply is ideal for TTL digital And the circuit to clearly display text. Is easy to see the value. Operation of the circuit is in normal state or input into Low. And it IC1 to a High state to stimulate Q1 to ...
Logic probe by IC 4050
When you learn digital circuit necessary tool for check logic of the digital. May flee don't pass Logic probe for extremely amateur type our electronics emphasize economize keep before. I has interesting circuit comes to present be Logic probe by IC 4050 by pillar equipment be IC ...