Circuit : Simon Oh
Email: Simon@SoftSwitching.com
This circuit may also be downloaded in PDF format, please click here.
Description:
A high voltage step-up DC power supply using adjustable flyback conversion.
Specification:
Vin = 220Vac +-10% @ 50/60Hz
Vout =0~600Vdc @ 0.25A
Switching Frequency: 70~100KHz
fig 1
Design Guidelines:
DCM mode, output power is 200W
The input RMS current in worse condition with discontinuous current mode may be calculated as:
If the optimum operating duty cycle is set at D=0.35, then input peak current can be found as:
Therefore the voltage sensing limit voltage level from the FAN7554 data sheet is 1.5V
Source : http://www.zen22142.zen.co.uk/Circuits/Power/oafc.htm
Related Links
All circuits of DC converter step up
All circuits of Step up dc converters
All circuits of Switching variable regulator
All circuits of High voltage power supply
Ignition coil driver by IC 555 + 2N3055
POWER SUPPLY 600 VOLTS FOR QRO
Power Supply Regulator 10-350V 50mA
Efficient flyback driver circuit by IC 555 + IRF510
0-1000V Regulated High Voltage Power Supply
This entry was posted on Thursday, June 28th, 2007 at 9:26 pm and is filed under dc converter, high voltage power supply, switching power supply.
