Telephone Recorder Switch by FET
This circuit will allow you to record both sides of your telephone conversations for future reference. For commercial orders placed over the phone such a recording device is invaluable.
Read more original source:http://electronics-diy.com/electronic_schematic.php?id=575
Related Posts :
This nifty little circuit lets you record your phone conversations automatically. The device connects to the phone line, your tape recorder's microphone input, and the recorder's remote control jack. It senses the voltage in the phone line and begins recording when the line drops to 5 volts ...
This Circuit is based on the UM5100 which can record speech into a digital memory and then play it back. The device is designed to be used directly with static RAM's up to 256K bits, or with EPROM 's or ROM's for playback only. High quality voice reproduction is possible and note that it is ...
This circuit will allow you to connect any tape recorder that has a mic and remote input to a phone line and automatically record both sides of a conversation when ever the phone is in use. You will need to take a couple of voltage readings before connecting the circuit. First determine ...
In a recent article, I discussed the difference between parallel and series telephone taps. In this article, I present a very simple and reliable parallel phone tap circuit useful for recording telephone conversations onto a tape recorder. When installing a telephone tap, its advisable no ...
Here is a teleremote circuit which enables switching on and off of appliances through telephone lines. It can be used to switch appliances from any distance, overcoming the limited range of infrared and radio remote controls. The circuit described here can be used to switch up to nine applia ...
or 
