Posts Tagged ‘Voltage Detector’



Body Charge Detector

Thursday, March 24th, 2011

It is well known that through such simple everyday activities as walking on a carpet or moving in a chair, the body accumulates a static charge – sometimes many thousands of volts. Due to its extreme sensitivity, this circuit will detect not only such charges but also EMF-induced voltages in the body, which are generally [...]

Low Supply Rail Detect voltage

Tuesday, March 22nd, 2011

Here’s a simple low supply rail detection circuit that costs peanuts and takes just 20 minutes or so to make. Its power consumption is quite low, so it could easily be built into battery-powered devices. Instead of using an op amp, the circuit is built around three low-cost transistors (Q1-Q3). Diodes D1-D3 form a 1.8V [...]

Voltage detector by IC TL431

Wednesday, April 14th, 2010

This be simple check pressure level circuit, with integrated number circuit TL431. When use power supply 5Volt in digital circuit. The general feeding signal input be high class logic be High, make have voltage way output be 5 Volt. But enough feed the level logic be Low as a result, make output level voltage be [...]