DC to DC Converter mini Step up Voltage
Here is a DC to DC converter using a standard 12 VAC center tapped power transformer and a single bi-polar NPN transistor….
Here is a DC to DC converter using a standard 12 VAC center tapped power transformer and a single bi-polar NPN transistor. The circuit is not very efficient but will produce a high voltage usable for low power applications. The input battery voltage is raised by a factor of 10 across the transformer and further raised by a voltage tripler consisting of three capacitors and diodes connected to the high voltage side of the transformer. The circuit draws about 40 milliamps and should operate for about 200 hours on a couple of āDā alkaline batteries. Higher voltages can be obtained by reducing the 4.7K bias resistor.
![]()
Original scheme edited by Bill Bowden, http://ourworld.compuserve.com/homepages/Bill_Bowden/
Related Links
All circuits of DC converter circuit
All circuits of Step up dc converters
All circuits of Simple circuit
All circuits of Simple dc converter circuit
Simple DC Converter For Digital Circuit by IC 555
LM2577 simple step-up converter 6V to 12V 1A
LM2597HV ā SIMPLE SWITCHER Power Converter Step-Down Voltage Regulator
Simple DC-DC Converter
20 Watt Simple Switcher Forward Converter (pdf)
Categories: DC converter Tags: dc converter circuit, simple circuit, simple dc converter, step up dc converters
Simple DC Motor Control
circuit was built to operate a small motor used for opening and closing a pair of curtains. As an advantage over automatic closing and opening systems, you have control of how much, or how little light to let into a room.
The four diodes surriunding the motor, are back EMF diodes. They are chosen to suit the motor. For a 12V motor drawing 1amp under load, I use 1N4001 diodes.
The DC Motor control Kit
Source :: http://www.zen22142.zen.co.uk/Circuits/Switching/
Related Links
Motor Control
DC motor driver
Stepping motor clocks
Small dc motor control
PWM Control Speed Motor 12V By TL494
PWM Motor Speed Controller – DC Light Dimmer by IC LM324
PWM Speed Motor Controller By IC 555
Stepper Motor Driver using L298 and L297
DC Motor Driver with L6203
PWM DC motor control with SG3525
Categories: Basic electronics, Electronic Control, Motor controller Tags: DC motor controller, Motor controller, simple circuit
Simple Timer by CA3140 + NE555
This be the circuit sets the time to model is simple,at can fix the time had long ago and have tall good accuracy. By use pillar equipment be IC CA3140 for fix time mouth and NE555 perform sound electric bell origin. By we can fine time value done to a turn VR1 can fine since 10 second arrive at 3 hour. When the time expires will have an electric bell that a loudspeaker. For the equipment that should choose specially. Be C1 100uF 16V values should are a kind Tantalum. Because tall quality more Electrolytic. The moderately but if no enough replace can sir. Request friends have fun the circuit sets the time this please sir.
Related Links
CA3140
NE555 monostable circuit
Simple circuit
Missing Pulse Detector By IC Timer 555
Ultra-Long Time Delay By IC Timer 555
LM555 Timer Used As A Voltage Comparator Or Schmitt Trigger
Water Softener Circuit using NE555
Sweeping Output Frequency Siren
Electronic Time Constant Control
RS – Flip-Flop Made With A LM556 Timer
D – Flip-Flop Made With A LM556 Timer
Categories: Circuit diagram, Timer Tags: CA3140, ne555 monostable circuit, simple circuit








or

