Posts Tagged ‘OTL-AMP’

The multi-purpose Amplifier using TDA2030

This The multi-purpose Amplifier using TDA2030. It is have power 8 watt (RMS) at 8 ohm loudspeakers. It is have low noise be valuable THD (Total harmonic distortion) 0.1% , When friends use Power supply Voltage Source 28 Volt at 4 ohm loudspeakers have output power 12Watt. But be high class the noise increases to are 2 times. Besides still three be usable with Volt supply about 9Volt , but there is the electric power is down respectively. The VR1 use for Volume popularity level of sound signal. By if a friend can’t seek 22K values use 50K values can replace. For other detail about the integrated circuit TDA2030 and other , friends see in the circuit better yes.

Related Links
More circuit about Class AB Amplifier
More circuit by IC TDA2030
More about about OTL Amplifier HIFI
30W Amp OTL by TDA2030 +Transistor
35W Amplifier BCL by TDA2030
Power Amp Super Bridge 120W by IC TDA2030
30 Watt Amplifier HiFi using TDA2050
Power Amplifier OCL 50W by BD250C , BD249C
21W Class AB amplifier by TIP41
30W Class AB amplifier by TIP2955 + TIP3055

TBA820 Amplifier

A very useful audio amp in an 8-pin DIL package. The IC features a very low minimum working supply voltage of 3V, low quiescent current, good ripple rejection, no crossover distortion and low power dissipation. Maximum supply voltages is 16 Volts into 16 Ohms speaker, 12Volts into 8 Ohms and 9Volts into 4 Ohms.

Source: http://www.next.gr/inside-circuits/-l3459.html

Related Links
More circuit about Power Amplifier
More about OTL Amplifier HIFI circuit
More Circuit by IC TBA820
More circuit about car power amplifier
30W Amp OTL by TDA2030 +Transistor
LM379 power amplifier OTL stereo 6W+6W
Amp OTL 100W by 2N3055 (with PCB)