Contact: webmaster@eleccircuit.com
eeweb.com
Advertisement

Posts Tagged ‘NiMh battery charger’

NiMh battery charger using CD4541

The circuit is capable of supplying either a trickle (50 mA) or high-current (1-A) charge. You can select either charging method or an automatic mode that will first trickle charge a battery if it is particularly low before switching to
high-current charging.

Read More source: http://www.circuitsuggest.com/battery-charger.html

Related Links
More Circuit about NiMH battery charger
More Circuit about high current battery charger
More circuit about CD4541

USB port AA NiMH and NiCd Battery Charger by IC 393
Fast charge Controller with MAX712 – MAX713
Nicad Battery Charger by IC LM317T
USB Li-ion battery charger
USB Li-ion battery charger by MCP73861
500mA Li-Ion Charger LTC1731-4.1

Be the first to comment - What do you think?  Posted by admin - May 22, 2009 at 1:17 am

Categories: Battery charger   Tags: , ,

Fast charge Controller with MAX712 – MAX713

The MAX712 and MAX713 are nickel cadmium (Ni-Cd) battery fast charge controllers which will fast charge batteries from a DC source at least 1V higher than the maximum battery voltage. 1 to 16 series cells can be charged at rates up to 4C. A voltage-slope detecting analogue-to-digital converter, timer, and temperature window comparator determine charge completion. The MAX712 or 713 are powered by the DC source via an on-clip +5V shunt regulator, and draw a maximum of 5uA from the battery when not charging. A low-side current-sense resistor allows the battery charge current to be regulated while still supplying the power to the battery’s load.

Source: http://www.next.gr/inside-circuits/Fast-charge-Controller-with-MAX712-MAX713-l5869.html

Related Links
More Circuit about Nicad Battery Charger
More Circuit about NiMH battery charger
Automatic Battery Charger

Portable USB Charger (Version 2.0)
Auto Fast Battery Charger by LM311 for CAR
NiCd Battery Fast Charger by MAX712
USB port AA NiMH and NiCd Battery Charger by IC 393
Solar garden LED light and single NiCd AA charger
USB port AA NiMH and NiCd Battery Charger by IC 393

Be the first to comment - What do you think?  Posted by admin - November 14, 2008 at 7:09 am

Categories: Battery charger   Tags: , ,

USB Powered AA NiMH – NiCd Battery Charger by LM393

USB Powered AA NiMH - NiCd Battery Charger by LM393

The charger in this project is designed to charge two AA NiMH or NiCd cells of any capacity (as long as they are the same) at about 470mA. It will charge 700mAh NiCds in about 1.5 hours, 1500mAh NiMHs in about 3.5 hours, and 2500mAh NiMHs in about 5.5 hours. The charger incorporates an automatic charge cut-off circuit based on cell temperature, and the cells can be left in the charger indefinitely after cut-off.

Source:http://www.stefanv.com/electronics/usb_charger.html

http://electronics-diy.com/

Thank you.

Related Links
More Circuit about NiMH battery charger
More Circuit about Nicad Battery Charger
More about USB port

USB Li-ion battery charger by MCP73861
USB-Powered Lithium-Ion Battery Charger by LM3622
NiCd Battery Fast Charger by MAX712
USB Battery Replacement by LM317
Portable USB Charger (Version 2.0)

Be the first to comment - What do you think?  Posted by admin - March 30, 2008 at 2:43 pm

Categories: Battery charger   Tags: , , ,

Advertisement

Next Page »