Contact: webmaster@eleccircuit.com
eeweb.com
Advertisement

Posts Tagged ‘music amplifier’

Hi-Fi audio amplifier by ic TDA2003

This is the Hifi power amplifier circuit, will be used TDA2003 ic number. The normal operation of the integrated circuit,the music amplifier for car audio radio sound.Which it uses the supply voltage from 12 volt car battery.But this circuit adapted for use at home by listening to change power supply to 15 volts.
This allows a higher watt power than the existing 3watt RMS.The TDA2003 IC is protected from damage and short circuits,When the load over.Maximum Voltage of 28 volts, the frequency response 40 Hz – 15 kHz.
When entering the power supply 15 volts to the circuit. The C1 coupling audio signal through the VR1 to adjust the volume.Then sent to the C2 anti-noise DC input signal to the pin 1 of IC.The non inverting amplifier circuit is a non-return phase.This is the signal output pin 4, by a C5 enhances the stability of low-frequency response the better.And noise will be dropped down to ground by R4 and C6 before output to speakers.Another part of the output signal, which is fed back through C3, and R1, to enter the pin 2 inverting.To maintain a constant frequency response at-3dB.And if you want to add. Frequency response is to reduce the C3.The C8 is a filter file before the operation.C7 cut out noise from the supply.If you want a stereo amplifier,Is to create an additional set.

Related Links
More circuit about Hi-Fi Audio amplifier
More Circuit about music amplifier
More circuit by IC TDA2030

The multi-purpose Amplifier using TDA2030
Amplifier BCL 35 Watt by TDA2030
30W Amp OTL by TDA2030 +Transistor

Be the first to comment - What do you think?  Posted by admin - September 27, 2010 at 6:34 am

Categories: Power Amplifier   Tags: , ,

300Watt audio amplifier HIFI by MJ15003-MJ15004 Transistor

Follow the request of friends who likes High power Amplifier Circuit. I then beg for to advise this circuit. It has can to give the electric power about 300Watt RMS unless. Still be amp OCL Model Class AB give sound tall power and certainly should systematically protect that excellent a loudspeaker then torn difficult. Besides still use Transistor replace the integrated circuit then give waste matter feeling cancels bland three goes up and have MJ15003 and MJ15004 then have respond electric good enough power. When friends see the circuit has already , will have plentiful detail,then inappropriate for hobby Electronics man type. But if friends want to try build , have no a problem , be lucky.

Related Links
Home Amplifier Circuit
Sound Amplifier Circuit
More Circuit about MJ15003

Power Amplifier MOSFET HI-FI 300W by 2SK1058, 2SJ162
Amp OTL 100W by 2N3055 (with PCB)
120W MOSFET power amplifier by IRF540-IRF9540
240Watt Mosfet amplifier using BUZ23

Be the first to comment - What do you think?  Posted by admin - September 23, 2008 at 7:52 am

Categories: Power Amplifier   Tags: , , ,

Advertisement