Contact: webmaster@eleccircuit.com
eeweb.com
Advertisement

Posts Tagged ‘MC34063’

iPOD – MP3 Player Charger by MC34063

iPOD - MP3 Player Charger by MC34063

Portable iPod charger that you can use while away from your computer. The circuit is based around an MC34063 switchmode regulator. This has high efficiency so that there is very little heat produced inside the box, even when delivering its maximum output current. The circuit is more complicated than if we used a 7805 3-terminal regulator but since the input voltage could be 15V DC or more, the voltage dissipation in such a regulator could be 5W or more at 500mA. and 5W is far too much for a 7805, even with quite a large heatsink.

Read More Source:http://electronics-diy.com/electronic_schematic.php?id=139
Thank you.

Related Links
More circuit about IC MC34063
More about Ipods
More Circuit about NiMH battery charger
More Circuit about USB Battery Charger

Portable USB Charger (Version 2.0)
USB port AA NiMH and NiCd Battery Charger by IC 393
USB Lipo Battery Charger by MAX1555
USB-Powered Lithium-Ion Battery Charger by LM3622

Be the first to comment - What do you think?  Posted by admin - January 2, 2008 at 11:18 am

Categories: Battery charger   Tags: , , ,

MC34063A the inverting converter

MC34063A the inverting converter

The inverting converter is the power unit to make the negative output voltage with the positive input voltage. The converter which was made this time makes -2V to -10V output voltage with the input voltage of +12V. Because it makes the limitation value of the input electric current about 1.3A, the maximum with the input electric power is about 16W.

Read More Source:http://www.hobby-elec.org/e_ckt234.htm

Related Links
All circuits of DC to DC converter step up voltage
All circuits of DC converter step down voltage
All circuits of Step down converter
All circuits of Step down regulator
All circuits of Switching power supply
All circuits of MC34063

Simple step down dc converter multi voltage
Single chip voltage converter by HV4205E
5VDC Switching regulator from 9V battery by LT1073-5
9V to 3V Step-Down Converter by LT1073
12V Switching Regulator Boosts Input Voltage
A flyback converter high voltage supply by 555

Be the first to comment - What do you think?  Posted by admin - August 27, 2007 at 10:18 pm

Categories: DC converter   Tags: , , ,

Voltage Regulator 12V 1.5A for Battery by MC34063

The circuit is a good battery. It is Control Volttage regulator Output 12V 1.5A , Input Voltage battery 5V-13V Only.

Use IC- MC34063 so easy circuit, Adjustable VR1 for Control Efficiency at 12V 600mA.

Related Links
More Circuit about Li On Battery Charger
More circuit by IC MC34063
More Circuit about Low Drop Out Regulator

DC Converter 12V to 24V 2A by IC 40106 and Mosfet BUZ11
LM2577 5V to 12V DC Converter step up Voltage Regulator
LM2575 Switching Regulator 1.2-12V for Solar
12V to 16V DC/DC Converter with LM2577

Be the first to comment - What do you think?  Posted by admin - August 6, 2007 at 12:55 am

Categories: Battery, Power supply, Switching power supply   Tags: , , ,

Advertisement