IRF540 | Electronic Project Circuits

Posts Tagged ‘IRF540’

Inverter 100W 12VDC to 220V by IC 4047 – IRF540

This is inverter 100W circuit, use IC 4047 alike inverter 100W transistor I use Mosfet IRF540 instead Transistor 2N3055.

It good Idae, power output 100W from transformer 2-3A.

Read detail more in circuit.

Be the first to comment - What do you think? Posted by admin - October 12, 2007 at 6:41 pm

Categories: Inverter Tags: 12V, IC 4047, IRF540, mosfet inverter circuit

Power amplifier 65W with HEXFET IRF540, IRF9540

A medium power amplifier that is characterized by a lot of good sound quality, but simultaneously is very simple in the construction. Him uses, enough time in my active loudspeakers. In his output stage exist the very good FET transistors, technology HEXFET, transistor which are controlled by voltage and no by current as the classically bipolar transistors. The circuit has symmetrical designing, resolving thus the harmonic distortion problem. All the transistors that are used in the circuit are simple and they exist in big clearings in the market. The pairs of differential amplifiers Q1-2 and Q3-4 should be matched between them and near the one in the other….

Part List

R1-15-16-21-22-17-18=1Kohm R33=68ohm 5W Q1-2=BC550C [matched]
R2=47Kohm R35-36=6.8ohm 1W Q3-4=BC560C [matched]
R3-4=10Mohm TR1=1Kohm trimmer Q5=BC560C
R5-6-13-14=1.2Kohm TR2=1Mohm trimmer Q6=BC550C
R7-12=47ohm C1=2.2uF 63-100V MKT Q7-11=BD140
R8-9-10-11=22ohm C2=1nF 100V MKT Q8-9-10=BD139
R19=82ohm C3-4=2.7nF 100V MKT Q12=IRF9540
R20=22Kohm C5=330pF ceramic or mylar Q13=IRF540
R23-26=56ohm C6-7=100uF 16V F1-2=Fuse 2.5A Fast
R24=2.2Kohm C8=1uF 100V MKT L1=see text [2]
R25=560ohm C9-11-12=100nF 100V MKT J1= 2pin connector 2.54mm step
R27-30=150ohm C10-13=470uF 63V
R28-29-31-34=15ohm C14=33nF 100V MKT Q8-10-11-12-13 on Heatsink
R32=150ohm 5W D1-2=LED RED 3mm [see text] [1] All the resistors is 1/4W 1% except quote differently

Read More Source:http://users.otenet.gr/~athsam
Thank you.

Be the first to comment - What do you think? Posted by admin - September 6, 2007 at 8:50 pm

Categories: mosfet amp Tags: Hexfet power mosfet, IRF540, IRF9540, Mosfet amps

Power Amplifier 45W with HEXFET IRF9540,IRF540

A ideal solution for the make a good, low cost power amplifier. It’s a ideal solution for the creation a system of home cinema. The preamplifier and the driver support in a operational amplifier [IC1]. The voltage fall in resistors R5 and TR2/R6, drive the output FET’s gates and is proportional with the input signal level. Transistors Q1-2 function as voltage stabilizers in the supply lines, but ensure also the essential voltage fall, because the IC1 it should not they are supplied with voltage bigger Â± 18V. …

Part List

R1=47Kohm C1-2-6-7=100nF 100V MKT Q5-6=IRF9540
R2-12=1Kohm C3-4=22uF 25V Q7-8=IRF540
R3-4=3.3Kohm C5=220pF styroflex TR1=5Kohm trimmer multiturn
R5=1.2Kohm C8-9=4700uF 63V TR2=1Kohm trimmer multiturn
R6=[1.2Kohm] 820ohm *See text C10=1uF 100V MKT F1-2=fuse 3A
R7=270ohm D1-2=15V 0.5W zener J1=2pin connector 2.54mm step
R8=220ohm IC1=LF411orAD711or LF351 J2=5pin connector 5mm step
R9=27Kohm Q1=BC550C
R10-11=22Kohm Q2=BC560C All Resistors 1/4W 1% metal film
R13-14-15-16=150ohm Q3-4=BC547B

Read More Source:http://users.otenet.gr/~athsam
Thank you.