Contact: webmaster@eleccircuit.com
eeweb.com
Advertisement

Posts Tagged ‘IR remote control’

Remote control Encoder M145026

This encoder can generate up to 19,683 codes from 9 address lines by detecting 1,0, or open circuit. To initiate the transmit sequence, pin 14 should be pulsed low. The encoder will now output on pin 15 a data stream representing the condition on each of the address/data pins in turn and then repeat the operation, so that two complete identical words are transmitted. If pin 14 is held low, the output will be continuous, otherwise two identical words are output for each pulse on pin 14. A 1 is transmitted as two long pulses, a 0 as two short pulses, and an open circuit as a long pulse followed by a short pulse.

Read more :http://www.next.gr/inside-circuits/
Remote-control-Encoder-M145026B-1-l5876.html

Be the first to comment - What do you think?  Posted by admin - November 9, 2008 at 6:24 am

Categories: Electronic Control   Tags: ,

Simple Infra-Red Transmiter – reciever Shematics by IC4060

This 1 channel infrared transmitter/receiver remote control is the cheapest and simplest you can find. The transmitter transmits a sequence of pulses on 36 KHz frequency carrier. The diodes are Schottky type because of their low voltage drop (only 0.2V).

Read more :http://www.next.gr/inside-circuits/Simple-Infra-Red-Transmiter-reciever-Shematics-l4356.html

Related Links
More circuit about Infrared Circuit
More infrared switch
More circuit about IR Remote Control

Infra Red Switch control by normal remote
Infrared Remote Control
32 Channel IR Remote Controller by SL490

Be the first to comment - What do you think?  Posted by admin - November 3, 2008 at 6:43 am

Categories: Electronic Control   Tags: , ,

The Remote controller by 16F627

You can control with the remote in the first place Relay 4 on/off but also all the other options from the Garden Timer. It has a power down function, after 20 sec when you press a button it will go to sleep and wait till you press Button 5 or 6. With button 5 relay 4 will switch with button 6 only the remote will come to live You can not power it up with button 1..4. PortB interrupt change. When power-up the led will flicker 3 times in 5 sec.

Read more source:http://users.picbasic.org/projects/
Thank you.

Related Links
More circuit about IR Remote Control
More circuit about Remote Control
More about PIC Microcontroller
More circuit by IC PIC16F627

Infrared Remote Control by Triac
Digital Remote Thermometer
IR Remote Control Modulation Detector
Infrared Remote Control
32 Channel IR Remote Controller by SL490
Infra Red Remote Control Extender by CA3140

Be the first to comment - What do you think?  Posted by admin - June 3, 2008 at 1:21 pm

Categories: Electronic Control   Tags: , , ,

Advertisement

Next Page »