simple audio mixer circuit with fet 2n3819
This circuit, a simple mixer circuit.It can mix two signal channels and one channel is output.Using a codec circuit,Convert stereo audio to mono audio time.
It can increase the number of channels too. By adding a VR1, R1 and C1 to the amount needed. Then connected to Buffett a new one.Most importantly is eating circuit current is very low.Can use with 9-volt batteries immediately.
When entering voice signal, one of input 1 and input 2. Audio is via C1 and C2 of each channel,served coupling signals to VR1 and VR2. To adjust the audio to the Fet Q1.Which it serves, including audio. Then expand signal the output pin S through C3 For coupling signal again, before leaving to the output.
Related Links
See other circuit on audio mixer
See other circuit on fet amp
See other circuit on 2N3819
Audio Mixer by IC LF353
2-INPUT AUDIO MIXER by 2N3904
Mini Mixer by BC550C
Easy Audio Mixer by LM837
Categories: Audio diagram, Pre Amplifier, Tone control Tags: 2N3819, audio mixer, fet amp
or 
