Posts Tagged ‘dry cell battery charger’



Easy dry cell charger with CMOS IC 4011

Saturday, April 9th, 2011

The dry cell charger circuit can be fully charged about 12 hours.When used with a 9 volt supply,the equipments in the circuit for the AA type cell.When using the C and D type cell, should reduce the value of the resistance Rx to be 68 ohms.In charge of the cell, you should not be charged [...]

Dry Cell Battery Charger using LM741 and IC4011

Wednesday, September 24th, 2008

This is Dry Cell Battery Charger Circuit. That can use charger battery get that about 12 hour. When apply to power supply 9 volt the equipment that fix in the circuit use for size battery AA. If use the size C or D should devalue of Resistor RX down be 68ohm and should not lead [...]

Salt Water Battery

Saturday, April 21st, 2007

About 13 years ago, I made a salt water battery to operate a single AA battery quartz clock. It ran for several months until I got tired of adding water to compensate for evaporation. The batttery consisted of 5 cells each producing about 300 millivolts. As I remember, I used 5 small olive jars filled [...]