Electronic Doorbell & Counter by 4026
Circuit : Andy Collinson
Email: anc@mitedu.freeserve.co.uk
Description:
This circuit uses a synthesized sound chip from Holtek, the HT-2811. This reproduces the sound of a “ding-dong” chiming doorbell. Additionally, the circuit includes a CMOS 4026 counter display driver IC to count your visitors.
Source :http://www.mitedu.freeserve.co.uk/Circuits/Switching/dbcounter.htm
Related Links
More digital circuit
More about counter circuit
More 7 segment LED counter circuit
Circuit Door Buzzer by NE555 + LM386
British Police Car Siren by IC 555
Circuit Door Buzzer by NE555 + LM386
American Police Car Siren by IC 555
Red Alert Startrek Alarm by IC 555
Categories: Audio diagram, Digital, Electronic Control Tags: 7 segment LED counter, counter circuit, IC 4026
Digital Step-Km Counter with IC 4026,4024
Max. range: 9,950 meters with two digits
Slip it in pants’ pocket for walking and jogging
This circuit measures the distance covered during a walk. Hardware is located in a small box slipped in pants’ pocket and the display is conceived in the following manner: the leftmost display D2 (the most significant digit) shows 0 to 9 Km. and its dot is always on to separate Km. from hm. The rightmost display D1 (the least significant digit) shows hundreds meters and its dot illuminates after every 50 meters of walking. A beeper (excludable), signals each count unit, occurring every two steps.
A normal step was calculated to span around 78 centimeters, thus the LED signaling 50 meters illuminates after 64 steps (or 32 operations of the mercury switch), the display indicates 100 meters after 128 steps and so on. For low battery consumption the display illuminates only on request, pushing on P2. Accidental reset of the counters is avoided because to reset the circuit both pushbuttons must be operated together.
Obviously, this is not a precision meter, but its approximation degree was found good for this kind of device. In any case, the most critical thing to do is the correct placement of the mercury switch inside of the box and the setting of its sloping degree.
Parts:
R1,R3____22K 1/4W Resistor
R2________2M2 1/4W Resistor
R4________1M 1/4W Resistor
R5,R7,R8__4K7 1/4W Resistor
R6_______47R 1/4W Resistor
R9________1K 1/4W Resistor
C1_______47nF 63V Polyester Capacitor
C2______100nF 63V Polyester Capacitor
C3_______10nF 63V Polyester Capacitor
C4_______10µF 25V Electrolytic Capacitor
D1_______Common-cathode 7-segment LED mini-display (Hundreds meters)
D2_______Common-cathode 7-segment LED mini-display (Kilometers)
IC1______4093 Quad 2 input Schmitt NAND Gate IC
IC2______4024 7 stage ripple counter IC
IC3,IC4__4026 Decade counter with decoded 7-segment display outputs IC
Q1,Q2___BC327 45V 800mA PNP Transistors
P1_______SPST Pushbutton (Reset)
P2_______SPST Pushbutton (Display)
SW1______SPST Mercury Switch, called also Tilt Switch
SW2______SPST Slider Switch (Sound on-off)
SW3______SPST Slider Switch (Power on-off)
BZ_______Piezo sounder
B1_______3V Battery (2 AA 1.5V Cells in series)
Read more Source: http://www.redcircuits.com//Page9.htm
Thank you.
Related Links
More circuit about IC 4026
More digital circuit
More circuit digital counter
More about counter circuit
More 7 segment LED counter circuit
0-99 Two Digit Counter By IC 74LS48 , 74LS90
3 DIGIT EVENT COUNTER by IC 4553 + IC 4511
circuit 4013 Modula-8-Counter
Simple Digital Counter by 4026
Categories: Digital, Meter Tags: 7 segment LED counter, counter circuit, decade counter circuit, digital counter




or

