Contact: webmaster@eleccircuit.com
eeweb.com
Advertisement

Posts Tagged ‘audio effect’

A Frequency Doubler Effect for Electric Guitar

This circuit is a octave shifting that is used for electric guitar is done by rectifying the original signal, just like AC to DC conversion inside your AC-DC power supply adapter. This circuit is use single supply instead of symmetric power supply. This is the figure of the circuit.
The rectifying is done by four 1N4148 silicon diodes, configured as full-wave rectifier bridges. Because the bridge is inserted inside the negative feedback of the operational amplifier (op-amp) U1B, the nonlinear characteristic of the diodes around the turn-on point (the forward bias voltage) is compensated by the op-amp’s feedback mechanism. As the result, the output of the rectifier looks like coming from ideal diode with no bias voltage needed. [...]
Source: http://www.zimbio.com/Power+Supply+Circuits/articles/xhIg6f2AwK0
/Frequency+Doubler+Effect+Electric+Guitar

Related Links
Frequency doubler
Audio effect
Electric guitar

Frequency Doubler with 4011
Guitar pre-amplifier using uA 741
Guitar Preamp Kit
Guitar Fuzz Box
Fuzz box by all FET

Be the first to comment - What do you think?  Posted by admin - October 21, 2009 at 4:49 am

Categories: Audio diagram, Oscillator generator   Tags: , ,

Sound effects generator by UM3561

A simple sound generator IC that can produce four sound effects. Designed for use in toys, the effects are selected by varying the connections to pins1 and 6 as follows.

Related Links
More circuit about audio effect
More circuit about Sound Alarm Generator
Telephone Voice effect Changer
Telephone Voice effect Changer
Rain sound effect Generator by 4060

Source: http://www.next.gr/inside-circuits/
Sound-effects-generator-UM3561-l5863.html

Be the first to comment - What do you think?  Posted by admin - November 18, 2008 at 5:53 am

Categories: Audio diagram   Tags: , ,

Tone Generator by 2N4891

This be Basic Tone Generator by UJT Transistor 2N4891 numbers. By it s can give with small-sized loudspeaker s have a voice electric loud bell moderately. The value of C1 be valuable a little for enhance the speed in the package and disgorge to load. In each round (Cycle) that get be sound frequency at shine depart a loudspeaker. By can fine sound frequency get with R2 – 100K the value Resistance low tall frequency. But if the value is Resistance the tall low voice frequency. This circuit has can to develop next again. Request enjoy something sound electric bell this circuit please sir, be lucky.

Be the first to comment - What do you think?  Posted by admin - August 19, 2008 at 11:00 am

Categories: Audio diagram   Tags: , ,

Advertisement

Next Page »