Stepper Motor controller by PIC16F84

On these pages, I will introduce a control circuit for stepper motor. The software of this project is adapted to Embedded Systems(Lab13) for 2002 of Cleveland State University.

Source: http://www.hobby-elec.org/e_step.htm
Thank you.

ULN2003 Control Stepper Motor by Parallel Port
This is an easy to build stepper motor driver that will allow you to precisely control a unipolar stepper motor through your computer's parallel port. With a stepper motor you can build a lot ...
Stepper Motor Controller by ULN2003
Stepper Motor Controller Connection Diagrams Four-Wire Connection The ULN2003 / MC1413 is a 7-bit 50V 500mA TTL-input NPN darlington driver. This is more than adequate to control a four phase uni ...
Driving Bipolar Stepper Motors by PIC16F84
Stepper motors are devices, which convert electrical impulses into discrete mechanical rotational movements. In a typical stepper motor, power is applied to two coils. Two stator cups formed a ...
74LS194, 74LS04 drive a stepper motor
There are so many ways to drive a stepper motor, Here is another circuit that use 74LS194 4 bit bi-directional universal shift register as a phase generator and UDN2543B to drive the unipolar step ...
Basic Stepper Motor Driver by 74194
The following diagram is for the main circuit of the motor driver. A testing version is shown later on this page. The testing circuit is laid out differently and shows the SN7474 in logic blo ...