The output voltage rises slowly and reaches 15 V in 5 seconds.
In order to perform this soft-start function, the LM317 voltage regulator IC requires an external universal PNP transistor and the L200 uses its internal comparator (pin 2).
After switch-on, the rising voltage on the positive side of the charging electrolytic capacitor slowly turns the (initially conducting) transistor off, thus raising the voltage (relative to ground) on the adjustment pin of the LM317. In the L200 circuit, the corresponding electrolytic capacitor’s rising voltage gradually relaxes the current-regulation loop inside the L200.
Source:http://www.zen22142.zen.co.uk/Circuits/Power/softstart.htm
Thank you.
Related Links
More Circuit about IC LM317
More Circuit about IC L200
More Circuit about power supply regulator
More about soft start circuit
Top LM317 regulator
regulator 1.25-30V 1A By LM317T(with PCB)
dual power supply 3V,5V,6V,9V,12,15V with LM317,LM337
L200 Variable Power Supply 3 to 15 volts 2Amp
Current Limiting Bench Power Supply with L200
power supply regulator 0-30V 2A by L200 and TL7705
This entry was posted on Saturday, September 8th, 2007 at 7:18 pm and is filed under LM317, Power supply.
