Simple Infra-Red Transmiter – reciever Shematics by IC4060
This 1 channel infrared transmitter/receiver remote control is the cheapest and simplest you can find. The transmitter transmits a sequence of pulses on 36 KHz frequency carrier. The diodes are Schottky type because of their low voltage drop (only 0.2V).
Read more :http://www.next.gr/inside-circuits/Simple-Infra-Red-Transmiter-reciever-Shematics-l4356.html
Related Links
More circuit about Infrared Circuit
More infrared switch
More circuit about IR Remote Control
Infra Red Switch control by normal remote
Infrared Remote Control
32 Channel IR Remote Controller by SL490
Related Posts :
An Infra Red wired Repeater circuit to control appliances from a remote location. The signal emitted by an IR remote control contains two parts, the control pulses and a modulated carrier wav ...
This is a 32 channel infrared remote controller circuit fundamentally includes key pad, decoder, transducer stage, an output and a battery. Circuit is like a pocket calculator in size. Command ...
Infrared Remote Control System Receiver By IC Digital This is a single channel (on / off) universal switch that may be used with any Infra Red remote control that uses wavelengths between 8 ...
This circuit is used to relay signals from an Infra Red remote control in one room to an IR controlled appliance in another room. The receiver is built around a silicon photodiode, the SFH2 ...
You can control with the remote in the first place Relay 4 on/off but also all the other options from the Garden Timer. It has a power down function, after 20 sec when you press a button it wi ...
or 
