Simple field strength meter
This circuit is Simple field strength meter that choose a specific frequency range.
It can be used to from 2 meter to 160 meters.
The telescoping antenna may be adjusted to its shortest length when working at 2 meters to keep the needle on the scale.
Meter should be a 100 microamp to a 500 microamp movement. The diodes are germanium type, shuch as 1N34, 1N60, etc. Silicon diode will also work, but they are a bit less sensitive.
Related Posts :
This is a simple proximity detector using IC CS209. The CS209A is a bipolar monolithic integrated circuit for use in metal detection/proximity sensing applications.The CS209A contains an oscillator set up by an external parallel resonant tank and a feedback resistor connected between pin 2 & ...
The V.U. meter that works with the integrated amplifier circuit.The signal will sound, the audio amplifier circuit into VU meter circuit.And will show the level of the signal by flashing light. Rhythm of the music with LED. When entering the power supply to circuit.The input VU meter is con ...
This strength meter the test can by catch 2 metals. From that time squeeze meet. It will make LED stick bright arrange prevent according to one's ability of squeezing the metal. The work of the circuit uses our body is formed lead the electricity changes to reach in the circuit. Which perfor ...
This circuit is sensitive to low frequency electromagnetic radiation and will detect for example hidden wiring or the field that encompasses a transformer. Pickup is by a radial type inductor, used as a probe which responds well to low frequency changing magnetic and electric fields. Ordinar ...
It is well known that through such simple everyday activities as walking on a carpet or moving in a chair, the body accumulates a static charge - sometimes many thousands of volts. Due to its extreme sensitivity, this circuit will detect not only such charges but also EMF-induced voltages in ...
or 
