Simple 27 MHz Receiver

This is a simple RF receiver mainly for low-distance digital radio receiver application. The analog output of this circuit should be connected to a schmitt-trigger signal conditioning circuit with a proper value capacitor (from collector of T3). L1 for 27Mhz is about 10 turns, 6 mm diameter coil body

Read More Source:http://jap.hu/electronic/sregrcvr.html
Thank you.

ZN414-MK484 Portable AM Receiver
An AM portable radio receiver made from the ZN414 IC. The ZN414 ic has now been replaced by the MK484 which is identical in performance and pinout. Designed around the popular ZN414 IC this ...
Simple Coil-less AM receiver by LF356
This AM receiver is working perfectly without the need of coils or even a variable capacitor. The LF356 is the basic component. P1 and P2 are the frequency selectors. Use a small telescopic an ...
A BIPOLAR REGENERATIVE RECEIVER
Contrary to what some radio experimenters think, a bipolar regenerative design can be made to work efficiently. The major concern is the low input impedance of the detector-amplifier bipolar s ...
6 Transistor Super Regen Receiver by BC548
This little super-regenerative receiver is essentially an AM receiver, with "slope detection" used for FM. By tuning to one side of the carrier, the receiver's tuned circuit converts FM to AM. ...
Simple FM Receiver by TDA7000
With the TDA 7000 you can build an FM radio with a minimum of components; most of them so easy to manage...like the ceramic capacitors that do not require polarization...and only two resistors ...