eeweb.com

Sequential Flasher Christmas light strings by SCR

Advertisement

Christmas Lights Led

Here is a simple circuit for sequentially flashing Christmas light strings or other similar low-power lamps. The socket symbols may be single bulbs or sockets for lamp strings. The load must be capable of operating from DC since the SCRs rectify the line voltage. The SCRs must be sensitive-gate types and must be able to handle the load current and line voltage. The 1uF capacitors are non-polar film types. A fuse is indicated and a GFI type of outlet is recommended.

Read more original source: http://www.techlib.com/electronics/powerflashers.htm

Related Links
All circuit of christmas tree light bulbs
All circuit of Lamp flasher
All circuit of Christmas lights led
All circuit of Fading led

Lamp Flasher Current 1A
Christmas Tree Lights Flasher with 7812+LM380
Super Flashing Light by C1061
10 LED Flashing using CD4017
Constant Current Source LED Drive

Related Posts :

  • This is Circuit Christmas Tree Lights Flasher with 7812 for supply regulator and IC LM380 for Signal generator dirve relay on-off the lamp two set. detail other see circuit. The Christmas Tree Lights Flasher Circuit. It is Lamp flasher that interesting by use IC LM380 for Oscillato ...

  • If you want Power Lamp Flasher at give electric tall power. As a result try out Table Lamp Circuit the this. It uses the integrated circuit NE555 be pillar equipment. Control the rate blinks of Lamp. Get , for the transistor power make Lamp 12V electric tall power about 20W or ...

  • This be Lamp Flasher again model apply to Lamp small-sized 6 Volt, by use the principle Amplifier Circuit that use transistor 2 pcs. By have regenerative feedback send pulse of current 60 mS. Which there is tall size arrives at many amp change low voltage lamp. For brightness rate of som ...

  • We come to see Lamp Flasher Current 1A that apply to supply Voltage 12V. Which power Transistor of NS number LM195 fixed work and don't work 1 time per second. For do Light Flasher give with Lamp 12V 1A. Grasping very trend sizes in or Limit Current in of LM195 protect Current at exce ...

  • This is super lamp flasher light. It is have high power out load(lamp 12V). I used the Transistor 2SC1061 or H1061 or TIP41 for drive lamp ligh 12V 20W. Thence voltage source is 12Volt form battery or 12V dc supply,so it have current 2A up. Circuit Super Flashing Light by C1061 This ...

Advertisement