Salt-Taster by LM324

Detects the amount of salt contained in liquid foods
Three-level LED indicator

This circuit was designed to detect the approximate percentage of salt contained in a liquid. After careful setting it can be useful to persons needing a quick, rough indication of the salt content in liquid foods for diet purposes etc.
IC1A op-amp is wired as a DC differential amplifier and its output voltage increases as the DC resistance measured across the probes decreases. In fact, fresh water has a relatively high DC resistance value that will decrease proportionally as an increasing amount of salt is added.
IC1B, IC1C and IC1D are wired as comparators and drive D5, D4 and D3 in turn, as the voltage at their inverting inputs increases. Therefore, no LED will be on when the salt content of the liquid under test is very low, yellow LED D5 will illuminate when the salt content is low, green LED D4 will illuminate if the salt content is normal and red LED D3 will illuminate if the salt content is high.

Parts:
R1________________470R 1/4W Resistor
R2,R5______________10K 1/4W Resistors
R3,R6_____________220K 1/4W Resistors
R4__________________5K 1/2W Trimmer Cermet
R7________________680R 1/4W Resistor
R8__________________2K2 1/4W Resistor
R9,R10,R11,R12,R13__1K 1/4W Resistors
C1________________100µF 25V Electrolytic Capacitor
D1,D2,D3______3 or 5mm. Red LEDs
D4____________3 or 5mm. Green LED
D5____________3 or 5mm. Yellow LED
IC1_______________LM324 Low Power Quad Op-amp

Please read more at the original source:http://www.redcircuits.com//Page68.htm
Thank you.

Plant Moisture Meter by IC 741
Stick the metal probes into a freshly watered plant and adjust R5 for a mid-scale meter deflection. The meter will monitor the soil wetness and the meter will indicate whether it is to moist o ...
Moisture Meter by 2N2222
Yesterday I tours an orchard of a friend. He consults about Moisture Meter Circuit. By this circuit uses for level moistness temple of the earth. Fine the value R2 give Meter read the valu ...
LED warning water the plants with ic 4093
Electronic users love trees. But no time and work and forget Enjoy water the plants.So the trees dry out.This circuit solves this problem.It also allows us to not water the plants with too oft ...
Water Softener Circuit using NE555
That circuit is based at a technique to remove or neutralize the salt in water, and protect the pipes at home as well as the washing machines or our selves from salt. Its called water softener ...
Moisture Activated Relay by Bipolar Transistor
Today we try to build warn the moistness or Moisture Activated better. Or do go to use be warn it rains. Because of be the circuit is simple. Follow the circuit will think use Bipolar T ...