Relay Timer switch By IC 555 and 741

In Fig.1 see a 100 second delayed turn ON relay RL1 switch, if plug power +12V in circuit. In Fig.2 see a two range 6-60 second and 1-10 minute auto turn off relay timer circuit, with 555.

Part
R1=1 Mohms C4=100nF 63V IC2=LM555
R2=330 Kohms C1-2=100uF 16V RV1=470 Kohms pot.
R3=680 ohms C3=1000uF 16V RL1-2=12V >120 ohms Relay
R4=2.2 Kohms D1=1N4148 S1-2=Push button n.o
R5-7=4.7 Kohms D2-3-4=1N4001 S3=2X2 switch
R6=47 Kohms Q1=BC214
R8-9=22 Kohms IC1=LM741

Source : http://users.otenet.gr/~athsam/relay_timer_switch.htm
Thank you.

Timer Plus Relay by IC 555
This be Timer Plus Relay Circuit by IC 555. When see the circuit also a little equipment. By the value R1 and C1 perform set the time give Relay work 11 long ago second. When we begin to en ...
simple timer with IC 4093 + 7808
The on time of the timer is set by the one shot built with R2/R3 C3 and IC2A: after pressing pushbutton S1 C3 will be charged slowly through R3/R2; as long as the voltage of C3 is below the schmi ...
Long Time Delays by CD4040
Generating long delays of several hours can be accomplished by using a low frequency oscillator and a binary counter as shown below. A single Schmitt Trigger inverter stage (1/6 of 74HC14) is ...
de luxe timer with IC 4093 +7808
The "de luxe" schematic makes use of all four schmitt trigger nand's of the HEF4093 IC The on time is set by the one shot built with R2/R3 C3 and IC2A: when the pushbutton is depressed C3 will ...
Timer with buzzer and optocoupler by IC 4060
This small Timer circuit by sam(good electronic man). sam say "A small circuit that can find a lot applications of measurement time. She has the possibility us inform with sound signal from the B ...