Rain Alarm using NE555
This entry was posted on Sunday, November 1st, 2009 at 6:40 am and is filed under 555, alarm systems.
This circuit gives out an alarm when its sensor is wetted by water. A 555 astable multivibrator is used here which gives a tone of about 1kHz upon detecting water. The sensor when wetted by water completes the circuit and makes the 555 oscillate at about 1kHz.
The sensor is also shown in the circuit diagram. It has to placed making an angle of about 30 – 45 degrees to the ground. This makes the rain water to flow through it to the ground and prevents the alarm from going on due to the stored water on the sensor. [...]
Source: http://adibakri.co.cc/rain-alarm/
Related Links
More about Rain Alarm circuit
More circuit about water sensor alarm
More about 555 alarm circuit
More about ne555 circuit
Water Softener Circuit using NE555
Water Sensor Alarm
Water Sensor Alarm Kit
Water Sensor Alarm using LM380
Water Softener Circuit using NE555
LIQUID LEVEL CONTROLLER KIT
Fluid Level Detector using LM1830N
Water Drain Pump Controller by IC 4013
