PWM D.C. motor drive Low loss speed control By 4093
This circuit is a very compact switching regulator for small DC motors. I use it for my small printed circuit board drill
(18 Volt, 1.5 Amp), but it is suitable for many other applications (e.g. 12V DC halogen dimmer).
Circuit description
R1, R2, C1, D1, D2 and CD4093 schmitt trigger IC1B build a 1kHz oscillator with adjustable duty cycle.
The output of the oscillator passes through buffer IC1B/C/D which drives power mosfet T1.
When T1 is switched on, a current will flow from the +Vmotor supply via the motor and T1.
When T1 is switched off, the motor current is interrupted; because the motor acts as an inductor,
it will try to maintain its current, which can flow through freewheel diode D3.
The avarage current through the motor depends on the duty cycle of the oscillator.
The circuit losses are very low, for my 1.5 Amp drill, no heatsink is required for T1.
Source : unknow …….
Related Links
More circuits about DC motor controller
More circuits about DC motor drive
More circuits about PWM driver
RF Dual DC Motor Controller
A Simple PWM Circuit Based on the 555 Timer
Related Posts :
My Friend whant circuit Control speed DC Motor. I find Circuit this form web http://www.solorb.com/elect/pwm/pwm2/ It nice circuit, use IC LM324 and FET IRFZ34N. R 10K = Control Speed Motor ...
This be Motor Speed Control Circuit 24 Volt at current 20Amp. By it uses IC SG3526Bcontrol in the character PWM that receive like very much and drive motor with power Mosfet number IRFP74 ...
There are so many ways to drive a stepper motor, Here is another circuit that use 74LS194 4 bit bi-directional universal shift register as a phase generator and UDN2543B to drive the unipolar step ...
The speed of a normal 3-phase induction motor is a function of the frequency of the supply voltage. Changing the speed of such a motor hence requires building a 3-phase power frequency convert ...
The transmitter circuit consists of WZ-X01 RF module, Holtek HT-640 encoder and 8-bit A/D converter. U1 ADC0804 converts the analog voltage to digital data; U2 encodes that data (D0~D6) along with ...
or 
