PWM DC motor control with SG3525
This control circuit is ideal for the accurate control of DC motors as well as other applications like lighting levels and small heaters etc. The circuit converts a DC voltage into series of pulses, such that the pulse duration is directly proportion to the value of the DC voltage. The great advantage of such a circuit is that almost no power is lost in the control circuit.
This circuit protects against overload and short circuit, PWM range can be adjusted from 0-100%, PWM frequency is 100HZ-5KHZ adjustable. Operation voltage from +8V~ 35V, minimum current consumption is about 35mA. Maximum current can go up to 6.5A. Efficiency better than 90% at full load.
The functions of three trim pots are as follow:
VR1: setting the minimum output voltage
VR3: setting the maximum output voltage
VR2: setting the output frequency.
Source:http://home.att.net/~wzmicro/3525.html
Thank you.
Related Links
See other circuit on Motor Speed Controller
See other circuit on PWM Speed Motor
More information about IC SG3525
PWM Control Speed Motor 12V By TL494
PWM Motor Speed Controller – DC Light Dimmer by IC LM324
PWM Speed Motor Controller By IC 555
Stepper Motor Driver using L298 and L297
DC Motor Driver with L6203
PWM DC motor control with SG3525
Related Posts :
There are so many ways to drive a stepper motor, Here is another circuit that use 74LS194 4 bit bi-directional universal shift register as a phase generator and UDN2543B to drive the unipolar step ...
The L6203 is a DMOS full bridge driver, which can handle the high peak current up to 5A and supply voltage up to 48V with RDS (ON) of just 0.3 ohm. The chip can run the motor at 4A continuous with ...
Here is circuit controlling the speed of small DC motors, Easy Circuit use IC NE556 and LM311 and IRF521 MOSFET transistor To read more Source:http://solorb.com/elect/pwm/pwm0/ Related Lin ...
This 555 timer based PWM controller features almost 0..100% This 555 timer based PWM controller features almost 0..100% pulse width regulation using R1, while keeping the oscillator freq ...
The transmitter circuit consists of WZ-X01 RF module, Holtek HT-640 encoder and 8-bit A/D converter. U1 ADC0804 converts the analog voltage to digital data; U2 encodes that data (D0~D6) along with ...


or

