power supply +20V and -20V 5A by LM338
Here is Circuit power supply +20V and -20V 5A,Use IC LM338.
Nick initially adjusted the quiescent current to 3.5A but found after listening tests that increasing this to 4A gave a noticeable improvement. Even at an Iq of 4A the amps run cool due to the substantial heatsinking (0.5degC/W for each output device and each LM338K). Variations in quiescent current and dc offset with temperature are minimal, with an Iq of 3.8A and a dc offset of less than 35mV at switch-on.
Read More Source:http://www.tcaas.btinternet.co.uk/jlhesl.htm
Thank you.
Related Links
More Circuit about Variable Regulator
More about DC Voltage Regulator Circuit
More circuit by IC LM338
More about Dual Power Supply Circuit
dual power supply 3V,5V,6V,9V,12,15V with LM317,LM337
Power Supply +5V to +25V, -5V to -25V 1A with IC 7805,7905
A Simple Voltage Regulator +22V -22V by TIP3055,TIP2955
+25V -25V DC Power Supply
Single Chip dual power supply +12V -12V by LM326
Related Posts :
This is idea circuit dual power supply +12V -12V by LM326 Single Chip IC. I want to know the single IC which can provide Both + V and -V from a single +Vin supply.. I need this for my dual su ...
My "regulated monster" is currently running 0.5-0.6 Amps bias per Hiraga's recommendations in the article. I tested the power supply which you may recognize as the PCB for the John Linsley-Hoo ...
1.2V-20V 10A adjustable dc power supply by LM338 A friend of me side radio amateur office. He wants Variable Regulate Power Supply high current about 10A go up. I then advise this circuit , ...
You can use this calculator to vary the value of the program resistor (R1) and output set resistor (R2) and calculate the output voltage for the LM317 / LM338 / LM350 family of three terminal ...
This is a LM338 based power supply (with Short Circuit Protection) which is not complicated and easy to build. I am using the supply for a long time, have no problem yet. Only current adjust i ...





or

