Power Amplifier OCL 60W by 2N3055 with PCB
This is Power Amplifier OCL 60W circuit. It is the circuit that gives bland excellent sound , because of use the transistor entirely (Hot part 2N3055 x 2) have no IC mix. Then may build difficult go to small but for what is the experienced person may have no a problem. For sound power that pay to come out about 60W at 8ohm size loudspeakers s build to sing can bail 12 inch sizes comfortablely. About story of the voltage supply for this circuit as a result the important. Should use the pressure about +/- 40V the trend doesn’t lower 3A .Other detail see in circuit picture.
Related Links
More transistor amplifier schematic
More circuit about ocl power amplifier
More circuit about 2N3055
Power Amp OCL 100W by Transister MJ15003,MJ15004(with PCB)
Power Amplifier ocl 60W by MOSFET K134 and J49 with PCB
Power Amplifier OCL 100W Mosfet J162 + K1058
Related Posts :
Today I begs for to advise Main Power Amplifier OCL 100watt by MJ802, MJ4502. May pleasing of friends at like firm bass and Treble be bold. Because it is Amplifier OCL model Class AB. And ...
A friend takes an interest to want to try build hi-fi power Amplifier the some one. He likes model class AB , because the sound is good. keen bass good distinct.I chooses this circuit gives ...
This is circuit MOSFET power amplifier OCL, Output 100w , use mosfet k134+j49 or Mosfet J162 + K1058 Output 112W at Speaker 8 OHM. Power Supply +56V/-56V 4A /Ch. Circuit power amplifi ...
The 50W Power Amplifier OCL Mosfet (K1058 + J162) is easy to build, and very inexpensive. To use Power Supply +35V -35V at 2A. Power Mosfet (K1058 + J162) must be mounted on heatsink. Can be d ...
This includes a 220uF capacitor and two diodes to slow down the switch-on to reduce the output thump as the output capacitor charges through the speaker. This is not essential, depending on sp ...
or 
