PIC16F628 Digital Clock Timer

This clock timer uses a PIC16F628 microcontroller to display 3 and 1/2 digit time and control an external load. It can be programmed to time from 1 to 59 minutes. The clock includes a calendar with leap year and optional daylight savings adjustments. The timer output can be set from 1 to 59 minutes and manually switched on and off. The clock also has a correction feature that allows an additional second to be added every so many hours to compensate for a slightly slow running oscillator. The oscillator uses a common 32.768 KHz watch crystal and the frequency can be adjusted slightly with the 24pF capacitor on the right side of the crystal.

Source:http://ourworld.compuserve.com/homepages/Bill_Bowden/pic_ck.htm
Thank You.

PIC16F84 Alarm Clock
This is an alarm clock I built. It was very effective during the sort time I used it, because I programmed it to play a very annoying tune through a speaker. I actualy started to wake up befor ...
Real Time Clock PCF8583
The PCF8583 is a clock/calendar circuit based on a 2048-bit static CMOS RAM organized as 256 words by 8 bits. Addresses and data are transferred serially via the two-line bidirectional I2C-bus ...
LM8560 Digital Clock 24 Hr with alarm
If do you want clock timer cicuit. I like this Circuit LM8560 Digital Clock 24 Hr with alarm. It is small and easy all in one pcb. I used IC LM8560 Digital Alarm Clock, 40 pin volttage supply 9V ...
24 Second Shot Clock by IC digital
Circuit :Milardo de Guzman Email :Milardo de Guzman Description: This is a circuit intended to be used in basketball shot clock. 24 second shot clock Notes: To start in 24 seconds; 2 ...
LCD Clock-Calendar with 16F628
The reason why I'm using a LCD display is because it allow me to display many characters and it doesn't need to be "refreshed" as 7-segment Led displays. Also, the interface requieres less I/O pin ...