PIC microcontroller power supply circuit

This is 5V portable power supply circuit for pic microcontroller experiments.
or PIC microcontroller power supply circuit.
As The PIC16F627A microcontroller use 5 volts DC power supply. My son need to build it as 5V portable power supply circuit, because of the need for safe and convenient use in all locations.

How it works
I want my son to embarked on building this projects by himself. So choose a simple circuit. as Figure 1. We use IC-7805 5 voltage DC regulator IC, which has been very popular.

the PIC microcontroller power supply circuit
Figure 1 the circuit diagram of the PIC microcontroller power supply circuit

We use the power supply input is 6 x 1.5V AA battery, Are connected in series The total voltage 9V. We used a conventional battery. It’s easy and cheap to buy.

9V to 5V DC converter circuit

S1 : switch to turn on-off this circuit.
F1 : Fuse is used to protect this circuit from overload output. We use 0.4A 50V only to safe all circuit.
IC1 : convert input voltage from 9V to 5V and the ability to maintain the regulated supply
LED1 : for show power on
R1 : reduce current flow to LED1 in safe value
C-100uF 16V : to filter current to smooth
C-10uF 16V : to filter output current to smooth
C-0.1uF 50V : to reduce noise as ripple voltage on high spike

Then I tech myson understand all components using on this project. As Figure 2 he draw them on his note book.

Figure 2 all components that we use

How to builds

Next step He solder parts on DIY Prototype Paper PCB Universal Board as Figure 3

To solder parts on DIY Prototype Paper PCB Universal Board
Figure 3 To solder parts on DIY Prototype Paper PCB Universal Board

We tried to cut leg of parts with the nail of my wife. As it’s small, easy to use. And very cheap as Figure 4.

pins cutting with nail clippers
Figure 4 pins cutting with nail clippers

Then, we apply 9V power supply to the circuit, and measure voltage output is 4.95V it is ok.

Next, I assemble the circuit in the Box as Figure 5, it look is great, this step I help my son build it because it is hard for him.
He draw text on the box to clear to use.

assemble the circuit on the box
Figure 5 assemble the circuit on the box

Then, We test with the PIC16F627A circuit pic microcontroller experiments as Figure 6 it works well.

test-this-projects-with-PIC16F627A-circuit
Figure 6 test this projects with PIC16F627A circuit.

The parts we will need
IC1___IC-7805 5V DC regulator
C-100uF 16V __Electrolytic capacitors
C-10uF 16V___Electrolytic capacitors
C-0.1uF 50V___Ceramic capacitors
LED1____LED as we like
R1___470ohms 0.5W resistors
S1___on-off switch
F1___Fuse 0.4A 50V
The Box,Wires, PCB, and more

           Eleccircuit highly recommends EasyEDA for PCB design and order

Low Cost & Fast PCB Prototypes - EasyEDA

Only $8.21 for 10 pcs, 2-Layer 100x100mm PCBs, 2-3 days delivery

 

2 Comments

  1. MR OHM 1970 September 13, 2015
  2. Akhras December 31, 2015

Add a Comment

Your email address will not be published. Required fields are marked *