PBS Switch Debouncing by 555
This circuit will remove the transient spikes and contact bounces from a non-latching push button switch.
Using a 555 timer as a monostable circuit, it is easy to build a good switch debouncer circuit. There are many circuits for SPDT debouncing, but not many for a normally open, push-to-make press button switch (PBS). The 555 monostable gives an output pulse of around 20 msec with component values shown. The formula for determining the output pulse is:
tout = 1.1 R1 C1
Related Links
More circuit switches
Touch Switch ON-OFF by IC 555
Voltage Controlled Switch using 555 Timer
Read More Source: Andy Collinson
http://www.mitedu.freeserve.co.uk/Circuits/Switching/debounce.htm
Thank you.
Related Posts :
This is circuit Bounceless Switch , Use IC 555 Timer for Easy Timer circuit. Output pin 3 pluse 0.1s. Control by push S1. Volt supply pin 8 = 12Volt Related Links More circuit Bounceles ...
This be simple bounceless switch circuit, In the character electronic switch a kind is one. That be of good quality tall and low noise convenient for the digital. If switch usual apply to dig ...
This toggle circuit operates by using a couple 555 timers wired as inverters. Pins 2 and 6 are the threshold and trigger inputs to the first timer and pin 5 is the output. The output at pin 5 will ...
This Touch Switch circuit use a part compares with voltage 2 group , within the integrated circuit timer LM555 or NE555. For perform wait for catch the change of voltage , which be born fr ...
This circuit allows an SPST momentary pushbutton to act as a push-on push-off switch, using a DPDT latching (bi-stable) relay. It was originally intended to allow a single pushbutton switch on ...
or 
