One-IC two-tones Siren with IC 4093
Double-tone Police sound Single-tone old ambulance sound
This circuit is intended for children fun, and can be installed on bicycles, battery powered cars and motorcycles, but also on models and various games and toys. With SW1 positioned as shown in the circuit diagram, the typical dual-tone sound of Police or Fire-brigade cars is generated, by the oscillation of IC1A and IC1B gates. With SW1 set to the other position, the old siren sound increasing in frequency and then slowly decreasing is reproduced, by pushing on P1 that starts oscillation in IC1C and IC1D.
The loudspeaker, driven by Q1, should be of reasonable dimensions and well encased, in order to obtain a more realistic and louder output. Tone and period of the sound oscillations can be varied by changing the values of C1, C2, C5, C6 and/or associated resistors. No power switch is required: leave SW1 in the low position (old-type siren) and the circuit consumption will be negligible.
Parts:
R1,R3___470K 1/4W Resistors
R2______680K 1/4W Resistor
R4_______82K 1/4W Resistor
R5______330K 1/4W Resistor
R6_______10K 1/4W Resistor
R7_______33K 1/4W Resistor
R8________3M3 1/4W Resistor
C1,C5_____10µF 25V Electrolytic Capacitors
C2,C6_____10nF 63V Polyester Capacitors
C3_______100nF 63V Polyester Capacitor
C4_______100µF 25V Electrolytic Capacitor
D1-D3___1N4148 75V 150mA Diodes
IC1_____4093 Quad 2 input Schmitt NAND Gate IC
Q1______BC337 45V 800mA NPN Transistor
P1______SPST Pushbutton
SW1_____DPDT Switch
SPKR____8 Ohm Loudspeaker
B1______6V Battery (4 AA 1.5V Cells in series)
Read More Source: http://www.redcircuits.com//Page5.htm
Related Links
More circuit about greater siren
More circuit about siren alarm
More circuit about security alarm
More circuit about IC 4093
Electronic Siren by IC Digital
American Police Car Siren by IC 555
Red Alert Startrek Alarm by IC 555
Water Activated Alarm by IC 555
British Police Car Siren by IC 555
Gate Alarm by IC 4011
Frost Alarm or Cold Activated Switch by IC 741
Single Zone Digital CMOS Alarm
Event Failure Alarm By IC Timer 7555
Miniature Loop Alarm
Travel Touch Alarm
Related Posts :
The second circuit simulates the siren of an American police car. It uses two 555 timers in the circuit. The 555 on the right is wired as an alarm tone generator and the second 555 timer on the le ...
This month I am making 3 different types of siren circuits based on the 555 timer. The first circuit simulates the siren of a British police car. It uses two 555 timers in the circuit. The 555 on ...
This circuit was requested by several correspondents. Its purpose was to obtain more power than the siren circuit already available on this website since many years (One-IC two-tones Siren) and to ...
This siren circuit simulates police, fire or other emergency sirens that produce an up and down wail. The heart of the circuit is the two transistor flasher with frequency modulation applied to t ...
The Travel Touch Alarm can be used to provide a audible alarm when someone touches the door knob or handle of your hotel room. The door knob or handle must be made of metal for the circuit ...





or

