For you high-voltage minibooster fans out there, here’s the one-chip, one battery way to do it.
The MAX1044 is a charge pump converter - it uses a capacitor as a “bucket” to pump charge from one place to another. Normally, there is a capacitor connected from pin 2 of the 1044 to pin 4. This capacitor is charged between +9V and ground, and then switched in parallel with a capacitor from pin 5 to ground in a way that makes a negative voltage on the second cap.
Read more Source : http://www.geofex.com/circuits/+9_to_33.htm
Related Links
All circuits of DC to dc converter step up voltage
All circuits of Step up voltage converter
All circuits of Multi voltage regulator
All circuits of Multiple Supply
LM317 Adjustable Regulator For batt 9V
Power Supply 9VDC no transformer
5VDC to +12V and -12V Isolated dual power supply
LM2577 5V to 12V DC Converter step up Voltage Regulator
DC to DC converter step up voltage by 40106
ICL7660 DC to DC Converter input 5V to output +/-5V
This entry was posted on Sunday, July 29th, 2007 at 2:29 pm and is filed under Circuit diagram, dc converter, switching power supply.
