This amplifier evolved from the previous 6 transistor mosfet amplifier. That design was already so good there seemed no reason to look for improvements, but the high open-loop distortion at 20kHz and the resulting triangular ‘error voltage’ extracted suggested that the non-linear mosfet capacitance was responsible for almost all the distortion, and although the closed-loop distortion remains below 0.01% this could easily be reduced further by driving the mosfets from a lower impedance just by adding an emitter-follower.
Source: http://www.angelfire.com/ab3/mjramp/amp7.html
Related Links
More circuit about Mosfet Amplifier
More Circuit about mosfet j162
More Circuit about mosfet k1058
More about Class AB Amplifier
Power Amplifier OCL 100W Mosfet J162 + K1058
Basic MOSFET amplifier 100W with 2SK1530,2SJ201
Power Amplifier MOSFET HI-FI 300W by 2SK1058, 2SJ162
120W MOSFET power amplifier by IRF540-IRF9540
240Watt Mosfet amplifier using BUZ23
This entry was posted on Thursday, January 3rd, 2008 at 6:26 pm and is filed under Power Amp MOSFET.
