eeweb.com

Monostable Multivibrator by 4538

Advertisement

Monostable Multivibrator by 4538

CD4538 is a dual Monostable Multivibrator. The pdf data sheet is here.
When you trigger the chip the output sends off one single pulse or one high-low event, like the pulse below.

The T+ pin 4 of U1a is the positive edge trigger or raising edge trigger input, the T- pin 5 is falling edge or negative edge trigger input.
Now see the image of the single pulse above which shows both the edges, If this is the input pulse at pin 5 then the falling edge turns the output pin 6 from low to high, this output remains high for time T = R2 * C1 and then goes low again, The output Q at pin 6 also looks like the image of pulse above. The Output pin 7 is the complementary state of pin 6, it is the reverse state or inverted form of pin 6 output.

Read More Source by Mr Anantha Narayan

http://schematics.blogspot.com/2004/11/monostable-multivibrator.html

Thank you.

Related Links
More circuit about Monostable Multivibrator
More circuit about one shot monostable
One-Shot By IC Quad Timer 558
Monostable Flip Flop
CMOS Toggle Flip Flop Using Push Button
Monostable Flip Flop
positive one-shot by ic 4528

Related Posts :

  • This the Simple Monostable Multivibrator circuit. That interesting by use IC CD4528 , be IC CMOS perform be Dual Monostable Multivibrator or One shot. When encourage at input make have a signal ...

  • This is digital circuit, It is One - Shot Timer make by IC 555. Power supply 5-15V, Output pin 3, Input pin 2 Trigger input. T = 1.1 RC Related Links More about one shot monostable circu ...

  • Circuit CMOS Monostable by 4011 Related Links More circuits about Monostable Multivibrator More circuits by IC 4011 More digital circuit Simple Monostable Multivibrator by IC CD4528 Mo ...

  • Since I implemented a D type flip flop using the PIC Logic Elements I thought I might go the other way and implement an entire D type flip flop in a single PIC. This uses the edge triggered and po ...

  • This circuit is a hybrid - D type Flip-Flop that is constructed from an LM556 - Dual Timer integrated circuit. The circuit is essentially a High-Tech and overly expensive version of the classi ...

Advertisement