Source : http://users.otenet.gr/~athsam/audio_mixer_pc.htm

Most cards of sound in computer, are deprived stereo input for microphone, on the contrary have stereo input for high level [ Line ]. The circuit uses the input Line of card of sound, in order to we place a two mono stereo microphone, in the input of card of sound. Simultaneously he is more functionnal, after we have the possibility of regulating the gain of stage of microphone and regulating the final level of sound externally and independent for each channel of microphone. This solution was selected in order to we can if we want mixing two mono microphones. Also exist the classic supply for Electret microphones. Simultaneously exist stereo input Line, with two choices plugs of input and regulation level of input with the RV4, making him mix of sounds from the microphones and the input Line, easy affair. The input A, use two plugs RCA [ JF3-4 ] and input B, use a classic stereo plug jack 3.5 mm of nail. The IC2A-B, make the addition of signals and they drive the stereo output, that becomes from the JF6 jack. In JF7, we can give the supply, bigger than + 9Vdc, from a simple external power pack. This voltage is stabilised in + 5V, from the IC3. This low voltage was selected in order, to does not exist danger overdrive of card of sound. If the level, is not in the level that we want, we can change the prices of resistors R14-19 and R21 until R24, with other smaller or bigger, so that we change also the percentage of gain of proportional stage.
Part List
R1-8-31-32=3.3Kohms� C1-4-7-9-12-17=10uF 16V IC1=TLC274
R2-7-27-30=100ohms� C2-8=470nF 63V MKT IC2=TLC272
R3-4-9-10=1Mohms� C3-24-27-28=100nF 63V MKT IC3=7805
R5-11-21-22-23-24=10Kohms� C5-10=10pF ceramic D1=1N4007
R6-12-15-17=1Kohms� C6-11=1uF 16V D2=LED 3mm
R13-14-19-20-28-29=47Kohms�� C13-16-20-21=47pF JF1-2-5-6=female jack 3.5mm stereo
R18-16-25-26=22Kohms��� C14-15-18-19=1uF 63V MKT JF3-4=RCA female plug
RV1=2X100Kohms Lin.��� C22-23-25=100uF 16V JF7=female jack 3.5mm mono
RV2-3=47Kohms log.��� C26=4.7uF 16V
RV4=2X47Kohms log. C29=470uF 25V All the Resistors is 1/4W 1% metal film
Related Links
More circuit microphone preamplifier
More Circuit Pre Mic
More circuit Tone control – Graphic Equaliser
Mini Stereo MIXER MIC-LINE for PC Audio Card
More circuit microphone preamplifier
More Circuit Pre Mic
Microphone Preamplifier by IC TL084
Pre MIC (microphone preamplifier) 3 CH by IC LM348
Tone Control Mono by 5 Transister (C945)
Two Microphone Preamplifier by BC109
Bridge adaptor by NE5534
More circuit bridge-amplifier
More circuit about OCL Amplifier HIFI
More circuit about BCL Amplifier HIFI
Active Tone Controls by Transistor
Tone Control Mono by Transister C945x3
Tone Control Mono by Transister C945x4
Tone Control Mono by Transister C945x5
More circuit Pre Amplifier – microphone preamp
Treble Booster By 741
Pre Tone Control Stereo (bass-mid range-treble) by IC NE5532
Pre Tone Control Stereo by IC NE5532
5 Channels 2 Octave Graphic Equaliser by 4558
5 Channels Graphic Equaliser by LA3600
10 Channels Graphic Equaliser by LA3600
This entry was posted on Monday, May 28th, 2007 at 9:47 pm and is filed under circuit com, Pre Amplifier - microphone preamp. You can leave a response, or trackback from your own site.



