Linear x10 Amplifier by 4011 Gate

This is very basic amplifier circuit,so I use IC digital Cmos 4011 quad NAND gate.
It is to give equal to 10x linear amplifier.
The resistor R1 = 1M ohm , R2 = 10M ohm.
This circuit can not output speaker because it is very low power amplifier.

Digital : Other gates made with NAND
An important property of NAND gates is that they can be linked to perform the functions of other logic gates. In fact, any logic function can be implemented using only NAND gates: If you have des ...
Standard Touch Switch by Gate of IC 4011
This circuit uses a 4011 logic gate digital as the bases of the touch switch. It are Standard and very easy because I used a Gate of IC 4011. In circuit at pin 2 of 1/4 IC is Hi logic "HI" ...
Frequency Doubler with 4011
This frequency doubler uses one CMOS quad, two input NAND gate package type 4011. The frequency doubler proper consists of an inverter IC1B, two differentiating networks R1/C1, R2/C2 and NAND ...
Simple Touch Switch One Shot by 4011
Here is a simple touch control switch, I use IC 4011. Logic HI at output is timer pulse delay control by C1 1S = C1 4.7uF(micro farad), After touching the plate connected,so well pulse outp ...
led display with nand gate digital control
This circuit operates in the digital circuit.It has 2 inputs are inputs inputs A and B inputs to receive input, By used nand gate ICs,To control the on-off of the lamp. Operation of the cir ...