FM Stereo Transmitter with IC BA1404

You’ll find that this is a very easy project to build. It will transmit good quality sound in the FM band ( 88 – 108 mhz ). One inportant item is that the IC chip operates on 3 volts DC. The chip will get destroyed if it is operated on any voltage higher than 3.5 volts. The antenna can be a standard telescopic antenna or a 2 foot length of wire. The input is in the millivolt range and you may need to add additional pots for the inputs. I was able to use this circuit for a walkman and a portable CD player in my car. I used the headphone jack on both and varied the signal with the volume control.

To adjust the circuit tune your FM radio to a quite spot then adjust the trimmer capacitor C8 until you hear the signal that you are transmiting. When you have a strong signal adjust the resistor R4 until the stereo signal indicator lights. If the input is to high of a signal you may over drive the IC chip. Use two 15 turn pots on the input signals to bring the level down. You can balance the signal by using headphones. The inductor L1 is 3 turns of .5 mm wire on a 5 mm ferrite core.

Source : http://home.maine.rr.com/randylinscott/feb98.htm

BA1404 HI-FI Stereo FM Transmitter
Whether you want to create your own radio station, transmit the music around the house, or simply create a wireless link between your iPod and a receiver in your car, this transmitter will let ...
BA1404 HI-FI Stereo FM Transmitter
Whether you want to create your own radio station, transmit the music around the house, or simply create a wireless link between your iPod and a receiver in your car, this transmitter will let ...
BH1417 Stereo PLL FM Transmitter
The new FM Stereo Micromitter is now crystal-locked which means that the unit does not drift off frequency over time. In addition, the distortion, stereo separation, signal-to-noise ratio and ...
Ramsey 25 BA1404 Stereo FM Transmitter
Stereo FM transmitter based on BA1404 and 145170 frequency synthesizer IC. Read More Source:http://electronics-diy.com/electronic_schematic.php?id=90 Thank you. Related Links More circ ...
FM Transmitter with 2N2222
The range of the transmitter when running at 9V is about 300 feet. Running it from 12V increases the range to about 400 feet. Related Links More circuit about RF More circuit FM Antenna ...