Let’s begin by soldering a three-pin ceramic filter to the PCB. These three pins will be coming from terminals #11, #12 and #13 of the TEA5711T chip. Next, solder another three-pin ceramic filter to the PCB. These three pins will be coming from terminals #7, #8 and #9 of the TEA5711T chip. Once that is done, continue with another three-pin ceramic filter by snipping off the center pin on the ceramic filter. Then go ahead and solder it to the PCB. This filter will be coming from terminals #5 and #6 of the TEA5711T chip.
Source:http://braincambre500.freeservers.com/TEA5711T%20FM%20Receiver.htm
Thank you.
Related Links
More circuit about RF
More circuit FM Receiver
FM Receivers by TL431 – 2N4416
FM Radio by LA1800
Simple FM Receiver by TDA7000
FM Receiver 4 Transistor by BF184
FM – AM Regenerative Receiver by 2N2646
One Transistor FM Receiver by MPF102
FM Radio TDA7088 Receiver
6 Transistor Super Regen Receiver by BC548
FM radio with TDA7000
This entry was posted on Thursday, January 17th, 2008 at 1:25 pm and is filed under RF-Radio Frequency.
