eeweb.com

Electronic Siren by IC Digital

Advertisement

Electronic Siren by IC Digital

With this circuit we can create a altered sound of siren. The oscillator IC1a-b is constituted by two gates NAND, oscillating in very low frequency. This oscillation drive the IC2, that is a electronic switch, which opens and closes in the rythm of oscillation. When closes the switch then the voltage of supply charge the capacitor C3 through the resistance R2. When switch IC2 opens, the C3 discharge through the R3. The voltage with which is charge the C3, regulates the VCO of IC3, that is PLL, so that we have in the exit his one altered sound. You can experiment with the prices of resistances and capacitors in order to you change the sound of siren. The R1, C1 check the time of operation, the R4, C2 check the frequency of produced sound and the R3, C3 check the change of sound.

Source : http://users.otenet.gr/~athsam/electronic_siren.htm
Sam Electronic Circuits 10/01

Related Links
Electronic Siren
Siren alarm circuit
Siren sound circuit
Siren sound effect

British Police Car Siren by IC 555
American Police Car Siren by IC 555
Emergency power siren 6 watt
Sweeping Output Frequency Siren
One-IC two-tones Siren with IC 4093
Electronic siren circuit using BC337

Related Posts :

  • This be Emergency power siren Circuit 6 watt sizes. It use Digital IC number IC 4011 perform produce the frequency pulse generator, be beep danger character. And have power mosfet wasp use a ...

  • The second circuit simulates the siren of an American police car. It uses two 555 timers in the circuit. The 555 on the right is wired as an alarm tone generator and the second 555 timer on the le ...

  • Many a person will might excited with siren sound the all that ever hear. Because we will hear when there is an accident emergency event. But ever suspect that how is those sound can happen ? ...

  • This siren circuit simulates police, fire or other emergency sirens that produce an up and down wail. The heart of the circuit is the two transistor flasher with frequency modulation applied to t ...

  • Operation of the circuit uses a UM3516 IC IC1 number ready to create a sound all four sound at pin 7, 8 of IC1 to the R1, VR1 to take to control the frequency of oscillator circuit the interna ...

Advertisement