This circuit is very basic to build. To open a the lock which is connected to the K1 Load you must press each momentary switch in the correct sequence. The sequence used in this circuit is S1,S2,S3,S4. If any of the other switches are pressed the circuit will reset and you will need to start over. Depending on how you wire the switches, you can use any 4 switch combination.
Related Links
More about Security Circuits
More about Electronic lock switch
One transistor code lock by 2N2222
Simple Combination Lock by IC 4017 74C14
Simple Electronic Combination Lock using IC LS 7220
This entry was posted on Wednesday, April 11th, 2007 at 12:00 am and is filed under Electronic Control.
