The gain of U1 can be controlled by a digital binary 1248 nibble at ABC.
The gain at digital 000 is unity or 1 and the gain at various stages are set by 4051.
There are eight different gains as the steps of gain resistor network is chosen by 4051.
The on resistance of 4051 channel around 100E gets added to U1 pin 2 internal impedance.
You can use separate resistor networks with trimpots for each channel if you require
but keep the networks total burden on U1 pin 6 to around 10K, not less than than.
You can use this to set the gain of a amplifier with the help of a microcontroller.
Read more Source:http://schematics.blogspot.com/2005/01/digital-gain-control-of-opamp.html
Thank you.
Related Links
More digital circuit
More gian control circuit
More op-amp circuit
Dimmer or power control
Control sound automatic by BC109
Control signal Automatic Fader by LF351
Temperature Controller with U217B
Frost Alarm or Cold Activated Switch by IC 741
Voltage Controlled Switch using 555 Timer
This entry was posted on Friday, May 16th, 2008 at 10:01 am and is filed under Digital, Power supply.
