circuit dc to dc converter 12V to +/- 30V for car with IC SG3525
This is circuit Dc to DC Converter for Car Amplifier,
Input 12V to Out +30V and -30V for Preamp or Power Amplifier.
use IC SG3525 and Mosfet,Circuit Switching supply.
I copy from forum :http://www.ubmthai.com/leksoundsmf3/index.php
Thank you
Related Links
All circuits of DC to DC converter step up voltage
All circuits of IC SG3525
All circuits of DC converter ic
All circuits of Switching Regulator IC
SG3525 DC Converter 12V to +35V,-35V
DC Converter 12V to 24V 2A by IC 40106 and Mosfet BUZ11
12V to 16V DC/DC Converter with LM2577
12V To 24V DC-DC Converter Circuit by LM358-BC337
Doubler voltage 12vdc to 24vdc with NE555
Related Posts :
This circuit will double almost any DC input voltage as well as handling plenty of current. 12 to 24V is just an example. With a few changes, it can also supply any desired output voltage. ...
This step-up converter is intended for use in a '67 Citroen 2CV. This car, and I use the word loosely, has a 6V battery and won't support a modern radio that needs 12V. The circuit described here ...
This circuit is boost regulator, input volt DC12V for output DC28V (28v relay) The circuit is built around the LM2585, and uses the energy stored in an inductor to boost the 12v to 28. The c ...
In order to step up the voltage output from four rechargeable AA batteries from around 5 Volts to the required 12 Volts the following circuit is used. The key component is the LT1073-12 DC/DC ...
SG3525 DC/DC Converter 12V to +35V,-35V Switchmode Power Supply For Car Audio The selected switching topology is called a "push-pull" converter, because the transformer has a double primary (or ...
or 
